Deutsch 
Electric finishing device for construction on small, medium and large carrier machines for superfinish processing of ground and finely turned surfaces.
Especially for use on workpiece bundles with radii or very small free stitches.
In addition to rotationally symmetrical shapes, flat surfaces and holes can also be processed.
| Technical data | Supfina 200 | Supfina 201 |
| Frequency DH/min, max / min | 1260 / 0 | 2200 / 0 |
| Amplitude in mm | 0 – 2.5 | 2.5 |
| Air pressure in bar | 1 – 6 | 1 – 6 |
| Device Weight in kg | 28 | 28 |
| Clamping device in kg | 12 | 12 |
| Stone Guide Stroke in mm | 25 | 25 |
| Stone Guide Number | 1 | 1 |
| Piston area in cm² | 12 | 31 |
| Mounting Position | 0 – 90° | 0 – 90° |
Documentation and videos
Further information as PDF
Download
Let’s get to know each other. Continue to download... ×
Get smarter – connect with us
Thanks for your interest in our solutions!Let’s get to know each other. Continue to download... ×
Watch a video
Play it on YouTube
Typical workpieces for this attachment
Simply select the workpiece to be machined or a similar one and receive a customized selection of suitable Supfina attachments.
Quick, easy, and precise.
Cup tappet
The superfinishing of the surface at the cup tappet is very important to ensure optimal performance, durability and reliability of the engine.
Synchronizer ring
The raceway of the synchronizer ring, also known as the "synchronizer ring slot" or "synchronizer ring groove," must be carefully machined for smooth operation of the gear unit. The superfinishing process is of crucial importance here.
Balance shaft
The bearings on the balancer shaft must be superfinished to reduce friction and wear, minimize noise, ensure precise alignment and increase durability. This improves the performance and efficiency of the engine.
Planetary gear
The front face of the planetary gear is finished to ensure precise alignment, minimized imbalance, increased durability, and reduced friction in the planetary gear system.
Crank shaft
For repairs and tuning, the bearing points of the crankshaft can be machined with superfinishing attachments. This can achieve surfaces like OEM or even better.
Rocker arm
The specified superfinishing devices can be used on the rocker arms to superfinish the contact surfaces with the camshafts and valves. The precise alignment and machining of the rocker arm geometry and a high-quality finish increase durability and reduce friction in the valve mechanism.
Pinion Shaft
The bearing points of the pinion shaft are exposed to particular loads. Therefore, these must be superfinished for a long running time.
Ball pin
Both the running surfaces and the ball surfaces must be finished. Supfina offers exactly fitting superfinishing attachments and tools.
Control slide
When using the control slide in hydraulic or pneumatic systems, the sealing surfaces are finished to ensure effective sealing and to obtain precise and smooth switching.
Roller bearing
Roller bearings are very different in size and shape. All have in common a highly stressed surface. The specified superfinishing attachments can be used to produce the special cross-ground surfaces that are necessary for long durability and low-friction running.
Rollers up to 50mm
Depending on the application, rollers in a wide variety of lengths and diameters require very low surface roughness up to mirror high gloss finish. Exactly the right field of application for superfinishing attachments and tools from Supfina.
Rollers up to 100mm
Depending on the application, rollers in a wide variety of lengths and diameters require very low surface roughness up to mirror high gloss finish. Exactly the right field of application for superfinishing attachments and tools from Supfina.
Eccentric roller
Superfinishing the eccentric surfaces and the bearing points is crucial to ensure low-friction operation and a long component service life.
Pump shaft
The bearing points of the pump shaft can be machined with stone or tape finish as required. For lathes, carrier machines or in a turret, Supfina offers a suitable device.
Sleeve
The outer surface of the sleeve is superfinished to increase the contact ratio of the guideway, thus making the sleeve more durable and precise. Superfinishing offers advantages, regardless of whether the sleeve is mounted in a ball bushing or sliding guide bush.
Driveshaft
The bearing seats of the drive shaft are finished to enable precise and low-friction movement of the shaft in the bearing. For both carrier machines, lathes and turret lathes, Supfina offers a suitable attachment here.
Gear shaft
The bearing seats of the gear shaft are finished to allow precise and low-friction movement of the shaft in the bearing. For both carrier machines, lathes and turret lathes, Supfina offers the suitable attachment here.
